The walls are made of high-quality Porotherm ceramic blocks from the Austrian company WIENERBERGER. The internal walls are 12 cm thick, and the external walls are 25 cm. A masonry mortar from Baumit or a similar product is used. The internal walls and ceilings are finished with machine-applied gypsum or lime plaster. All external edges of the masonry are protected with integrated trim profiles. The walls and ceilings of the bathrooms are finished with lime-cement plaster, with plumbing and sewage systems installed according to the project. The floor is made of a concrete slab with a slope for drainage. The roof is pitched according to architectural details, including vapor insulation, thermal insulation wool, and a double-layer German or Italian waterproofing system with a protected mineral finish on the upper layer. High-quality six-chamber PVC windows with triple glazing SYNEGO by REHAU, designed as “French windows,” are used to provide optimal lighting for the rooms. Part of the building’s façade will be constructed with a complete “integrated thermal insulation system” from Baumit – Austria, including 10 cm EPS thermal insulation boards, a reinforcing glass-textile mesh, adhesive plaster, primer, and finishing structural plaster. The finishing around the windows is made of 5 cm extruded polystyrene XPS. All apartments are equipped with intercom systems from the Spanish company GOLMAR, using magnetic chips for access control, ensuring higher security for the residents. The party walls are made with 10 cm EPS thermal insulation boards. All corners of the façade are protected with corner protectors, and above the window openings and at the bay windows, the protective profile includes a water drip.